First up was improving the floor planking. While boards are etched on the external portion of the kits, for some reason they decided not to do the same on the internal flooring. Since you can see inside the buildings through the open doors and windows, I used a heavy utility knife to score boards across the length of the building's floor. I then lightly scored each board with an X-acto blade to simulate wood grain. Finally, I used the utility knife and a file to remove the hard edges on the boards.
Prior to gluing the floor on to the support struts, I painted the struts and coated the building base with rock, static grass, and various aquarium plants. I recommend completing things in this order, as there is very little room for tools and brushes under the building once the floor is in place.
While support timbers are etched into the building walls, I though it looked a bit flat, so I added wood strips obtained at the local model train store. I also included some on the interior of the buildings to give them a bit more texture when the roofs are off during a game.
The buildings come with nice plank roofing, but I thought thatching would really improve the looks of the buildings and further hide their MDF nature. As such, I used the hobby standard of teddy bear fur. Unfortunately, the fur I was able to obtain locally was rather thin, so the backing was visible when placed up against the wood trim running along the spine of the roofs.
To hide this, I ran a seam of white glue along the top,then added strands of fur cut off the backing.
Painting and gluing of the thatch was done in the following order: brushed on rinse of diluted dark gray, rinse of diluted pewter gray, Woodland Scenics' scenic cement (rub in with old toothbrush to work it into the fur), dry-brushed dark gray, dry-brushed pewter gray, dry-brushed tan. I use the rinses before glue to try to soak color deeper into the fur.
First up is the Nipa Hut. This is the smallest of the huts in my purchase, but you could likely fit in a full squad if you really packed in the figures base to base. One thing to note is that the widow shades on each side hang at a different angle, so double check that you have the right support pieces before gluing (there are no part numbers).
This hut does not have the wood trim along the roof spine, so it was easy to hide the thatch seams with an additional strip of fur along the top.
Since a portion of the roof underside is readily visible on this hut, I scored planks and wood grain on that section as noted above. I had thought of reversing the roof panels to use the pre-etched planks, but unfortunately on this kit the peg positions did not allow for it.
Next up is the Kamalig Hut. This model has shutters rather than window shades, so I decided to only add the vertical wood strips in order to not obscure the shutters. The roof components on each side mirror one another, so I was able to glue them on upside down so the planking would be visible on the bottom.
Size-wise, this hut is a little bigger than the Nipa hut, so I think there should be no problem fitting in an entire squad.
The kit has window shades for half the windows. Slots are pre-cut for the shade supports, so you cannot alter which windows have shades unless you want to do a bit of work.
Painting of the wood portions was done using the pewter gray, dry-brushed with tan. I didn't apply the gray too thickly, as I wanted some of the natural browns of the MDF to bleed through and further add to the color variation.
Overall, I am very pleased with these kits and would recommend them. I was concerned that the raised supports would leave the buildings fragile, but they seem fairly sturdy. I also like the way Warbases did their best to hide the holes for the support pegs under the walls; there are only a few minor peg holes visible around the porch edges. If I am to have any criticisms, it would be to burn in the planking across the entire floor and that the roof corners likely need additional support/filling if you aren't going to glue thatching on top of them.
I have a couple of huts on order from Sarissa as well, so it will be interesting to see how the two manufactures compare in terms of quality and size. I'll make a further post once those huts are completed.
Oh, looks really great! Lovely terrain.ReplyDelete
Pretty cool. Maybe it's time to work on a southern Chinese army. Like the groups supplied by the British and Americans.ReplyDelete
Nice kit bashing...looks excellent!ReplyDelete
Very fine work!ReplyDelete
Thanks everyone! Yes, I was thinking the new Empress 30’s Brits may as work proxies for the Chinese Expediditionay Force in Burma.ReplyDelete